English
中文
-
09/262023
Dynamic | Tianjin Honghe...
On September 16th to 17th, the Hydraulic Pollution Control Subcommittee of the National Hydraulic and Pneumatic Standardization Technical Committee held a national standard review meeting in Shanghai. More than 30 experts and representatives from industries/enterprises across the country attended the meeting.
-
06/062023
Rainy season is coming, ...
After the instrument has been working for a certain period of time, especially in environments with high humidity, the air filtration combination may retain some moisture. You can check whether drainage is needed through the observation window on the back panel of the instrument. When drainage operation is required, the specific method is:
-
04/142023
Sending oil samples to d...
Some customers use different brands of particle counters or send oil samples to different laboratories for testing in order to determine the true situation of oil contamination. However, they find that the test results are different. Why?
-
04/072023
How many basic knowledge...
Working principle (photoresist method) When a liquid sample containing particles passes through the sensor's beam of light, a portion of the light is blocked by the particles, causing a change in light intensity. The amount of blocked light is proportional to the size of the particles. Therefore, by measuring the particles passing through the sensor
-
11/252022
Teach you some tips for ...
The particle counter is a precision instrument, and if it is used for a long time, it may have some minor problems. However, the cost of returning the instrument to the factory for repair is high and the cycle is long. In this small class, we will teach you a few simple self checking and self-study tips about desktop computers. Let's learn them now!
-
11/182022
荐 Let you learn about the ...
Friends who have followed the Honghe particle counter know that in addition to providing users with better pre-sales answers and after-sales maintenance services, we also constantly update the instrument performance
-
11/172022
Honghe L20 meets your ex...
Precision Manufacturing - L20 Meets Your Expectations for Laboratory Instruments - Desktop Computer Main Features Desktop particle counter can be said to be the best choice for laboratory analytical instruments. Its structure is precise and complex, and its functions are also the most comprehensive, with high precision, high sensitivity, and high
-
11/042022
Honghe Portable Wind res...
The portable particle counter is mainly designed for fluid particle detection that requires frequent changes in location. While inheriting the high standards and quality of Honghe products, we have also thoughtfully designed many operational details for the convenience of operators
-
10/252022
荐 Details see quality, LPC...
We adhere to precision manufacturing. In recent years, the application of advanced detection instruments such as liquid particle counters in the civilian industry has reached unprecedented heights and breadth, while also placing higher demands on the quality and functionality of the instruments. According to applicable occasions and work conditions
-
10/142022
Explanation of the Diffe...
The ACFTD size calibration method aims to determine the pollution level of solid particles. The definition of irregular shaped particle size is based on the longest chord diameter of the particle, with a standard particle size range of 1 μ m to 100 μ m. ACFTD calibration liquid particles
-
09/102021
Do you want accurate tes...
If some simple preprocessing work is carried out on the liquid sample before conducting pollution detection, it may eliminate some uncertain factors that affect the accuracy of the detection results, thereby making the detection results more objective and true. Particle dispersion 1. Particle dispersion liquid sample length
-
08/272021
Are there any doubts abo...
Although the particle counter is a precision electronic instrument, its failure rate is still very low in normal use. Some problems encountered during use are often "soft faults" that can be easily handled to work properly. Therefore, mastering some simple troubleshooting methods
-
08/232021
Three common pollutants ...
Lubricating oil contamination is a complex issue, some of which can be detected during daily inspections, while others cannot be observed by the naked eye. Moreover, for all pollution, when it can be detected by the naked eye, it indicates that it is already very serious. In short, Run
-
08/062021
Discuss the commonly use...
Honghe Oil Particle Counter Oil Monitoring Technology is an important means of diagnosing faults in mechanical equipment lubrication systems. By analyzing and characterizing the physicochemical performance indicators of oil in mechanical equipment and pollutants such as wear particles in the oil, it is possible to obtain
-
07/302021
8 common misconceptions ...
Any device cannot do without lubrication, but in actual production, there may be various reasons that lead to the misconception of lubrication, such as thinking that oil can lubricate, the higher the viscosity of oil, the better the effect, and so on. To avoid damage to the machine caused by incorrect operations, this article introduces
-
07/232021
The hazards of particula...
The solid particle pollutants in the oil are the main cause of wear. They interact with the surface of the components for a long time, resulting in various forms of wear, gradually damaging the surface of the components, increasing the fit clearance, and increasing internal leakage, leading to performance degradation
-
07/162021
The Harm of Particle Pol...
Wear and tear is a common and serious problem in machine operation, and is the main cause of component failure in hydraulic and lubrication systems. The solid particle pollutants in oil are the main cause of wear, which interact with the surface of components for a long time and produce various forms
-
07/152021
The 8th China UK Interna...
From July 9th to 13th, Mr. Hu Xiaolin, General Manager of Tianjin Honghe Technology Co., Ltd., led the R&D team to participate in the "8th China UK International Particle Technology Forum (PTF8)" held in Dali, Yunnan, and listened to the new opinions of domestic and foreign experts and scholars together
-
07/092021
Common types of fluid po...
The pollutants in fluid pollution refer to substances that are unwanted and harmful to the system in the working medium. The pollutants in the working medium can be divided into solid particles, water, air, and other pollutants according to their physical state. Solid pollutants are usually in the form of particles
-
07/022021
Analysis of the Working ...
When we want to choose a liquid particle counter, we often see the phrase "adopt XX working principle". Don't underestimate this "XX working principle". Knowing it can help us better understand the instrument, choose the instrument, and use it
友情链接：
Tianjin Honghe Technology Co., Ltd
E-mail：sales01@tjhonghe.com
I would like to call the information hotline:
Tel 022-58956940
Add： 5F, Block C-D, Building 3, No.13 Ziyuan Road, Huayuan Industrial Park, Tianjin
Scan QR code Follow us:
Copyright ©2022 Tianjin Honghe Technology Co., LTD.All Rights Reserved ICP record No. 19008642 -1
\©2022 Tianjin Honghe Technology Co., LTD. All Rights reserved
ICP备案号津ICP备19008642号-1
客服1
