Welcome to Tianjin Honghe Technology Co., LTD

图片展示

Service telephone

15102225673

在线表单

  • NAME *

  • TELEPHONE *

  • ADDRESS *

  • CONTENT FEEDBACK *

  • 提交

  • Security Code
    Refresh the code
    Cancel
    Confirm

Teach you some tips for self checking and self repairing desktop computers

Click: Time:2022-11-25 17:03:00


The particle counter is a precision instrument, and if it is used for a long time, it may have some minor problems. However, the cost of returning the instrument to the factory for repair is high and the cycle is long. In this small class, we will teach you a few simple self checking and self-study tips about desktop computers. Let's learn them now!


What should I do if my desktop computer suddenly experiences insufficient pressure?
search



Firstly, observe the status of the air pump to see if it is working:


1.The air pump is not working. Firstly, consider whether the air pump fuse is blown. After troubleshooting the fuse issue, if there is still a problem, contact the manufacturer for repair;2.2

2.The air pump is working. It is necessary to check whether the positive and negative pressure pipes connected to the air pump and the instrument are tightly connected, whether there is any air leakage, and whether the positive and negative pressure pipelines are aging.


After confirming that there are no issues with the air pump and positive and negative pressure tubes, then check the instrument itself:


1.Firstly, check the positive and negative voltage settings to see if they have been manually adjusted. If any adjustments have been made, please return to the correct position;

2.Check the rubber ring of the pressure chamber to see if it is aging (you can test the elasticity by hand). Aging rubber rings can cause insufficient sealing of the pressure chamber, resulting in pressure not rising.


What is the reason for the fluctuating count?
search


Consider whether to clean the instrument in a timely manner after each use. If the instrument is not cleaned in a timely manner, it can easily cause pipeline aging and affect the accuracy of counting results;


There are bubbles in the injection tube, what's going on?
search


Observe the injection injector tubing. If there are bubbles in the injection tubing, it is likely that the laser tube is blocked. At this time, the "recoil" operation can be used to perform the test after recoil.



Does the printer stop printing after replacing it?
search


Dear, the printing paper is reversed~





文章推荐

友情链接:

Tianjin Honghe Technology Co., Ltd

 

E-mail:sales01@tjhonghe.com

I would like to call the information hotline:

Tel  022-58956940

Add: 5F, Block C-D, Building 3, No.13 Ziyuan Road, Huayuan Industrial Park, Tianjin

Scan QR code Follow us:

图片展示

Copyright ©2022 Tianjin Honghe Technology Co., LTD.All Rights Reserved ICP record No. 19008642 -1

\©2022 Tianjin Honghe Technology Co., LTD. All Rights reserved

ICP备案号津ICP备19008642号-1

 

Service Center
全国热线电话
15102225673
Qrcode
扫码添加微信
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了